From WRTnode Wiki
Revision as of 17:28, 15 March 2016 by Noel (创建页面，内容为“=Light up WRTnode2R= file:2Rlightup.jpg<br /> *The board is powered by micro-USB connector, find an ordinary micro-USB power cable( which is not included in the...”)
Light up WRTnode2R
- The board is powered by micro-USB connector, find an ordinary micro-USB power cable( which is not included in the retail package)
- Plug into the baseboard's micro-USB connector, and the other side you could use any USB port which could offer more than 500mA and 5V power, such as a computer or a laptop's USB interface or a mobile phone charger or something like this.
- The blue LED lights on and the OpenWrt starts to run in the board.
- 20 seconds later, you will find a Wi-Fi with the SSID like WRTnode2P_xxxx( xxxx means the last four byte of the MAC address of your WRTnode2P), you could connecting the Wi-Fi with computer or phone with the password 12345678.