Difference between revisions of "Translations:WRTnode2R开箱指南/2/en"

From WRTnode Wiki
Jump to: navigation, search
(创建页面,内容为“=Light up WRTnode2R= file:2Rlightup.jpg<br /> *The board is powered by micro-USB connector, find an ordinary micro-USB power cable( which is not included in the...”)
(No difference)

Revision as of 17:28, 15 March 2016

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (WRTnode2R开箱指南)
=启动WRTnode2R=
[[file:2Rlightup.jpg]]<br />
使用microUSB供电,一头接在WRTnode2R标准底板的迷你usb接口,一头接到一个超过500ma的5v供电的地方,一般来说随便一个电脑啊笔记本啊手机充电器啊什么的都可以,上电以后,WRTnode2R核心板上的蓝灯亮起,里面的OpenWrt开始启动了,20秒后,你能发现一个WRTnode2R_xxxx(xxxx指你的WRTnode2R mac地址的后四位)的Wi-Fi,用电脑或手机或ipad连上,密码是12345678. <br />
Translation=Light up WRTnode2R=
[[file:2Rlightup.jpg]]<br />
*The board is powered by micro-USB connector, find an ordinary micro-USB power cable( which is not included in the retail package)
*Plug into the baseboard's micro-USB connector, and the other side you could use any USB port which could offer more than 500mA and 5V power, such as a computer or a laptop's USB interface or a mobile phone charger or something like this.
*The blue LED lights on and the OpenWrt starts to run in the board.
*20 seconds later, you will find a Wi-Fi with the SSID like WRTnode2P_xxxx( xxxx means the last four byte of the MAC address of your WRTnode2P), you could connecting the Wi-Fi with computer or phone with the password 12345678.<br />

Light up WRTnode2R

2Rlightup.jpg

  • The board is powered by micro-USB connector, find an ordinary micro-USB power cable( which is not included in the retail package)
  • Plug into the baseboard's micro-USB connector, and the other side you could use any USB port which could offer more than 500mA and 5V power, such as a computer or a laptop's USB interface or a mobile phone charger or something like this.
  • The blue LED lights on and the OpenWrt starts to run in the board.
  • 20 seconds later, you will find a Wi-Fi with the SSID like WRTnode2P_xxxx( xxxx means the last four byte of the MAC address of your WRTnode2P), you could connecting the Wi-Fi with computer or phone with the password 12345678.