root@OpenWrt:~# opkg install xxxx </pre>
Restore Factory Settings
Then you could do whatever you want in WRTnode2P via ssh, just like an ordinary Linux PC, and when you done something you dislike and want to restore the board as you first getting it, here's how:
root@OpenWrt:~# firstboot This will erase all settings and remove any installed packages. Are you sure? [N/y] y /dev/mtdblock5 is mounted as /overlay, only erasing files root@OpenWrt:~# reboot
Update firmware to support micor-SD card in baseboard
As the micor-SD card driver is not included in the factory firmware, if you are using a micor-SD card in baseboard, please update：
Here's a easy method:
- download the new firmware in your computer: http://d.wrtnode.com/WRTnode2P/openwrt-ramips-mt7628-wrtnode2p-squashfs-sysupgrade.bin
- Connecting your computer to WRTnode2P via Wi-Fi (SSID: WRTnode2P_xxxx password: 12345678)
- In browser go: 192.168.8.1, the page will jump to http://192.168.8.1/cgi-bin/luci automatically，the login password for root is empty by default, or what you have changed for the root account in the Linux CLI of WRTnode2P.
- Go: System->Backup/Flash Firmware finding "Flash new firmware image", and choose the firmware downloaded before, click the "Flash image" button, when uploading finished, click "proceed" to refresh the system.
This SDK is an universal one for all WRTnode hardwares, and for WRTnode2P, choosing [ MT7628 base boards ] in [ Subtarget ] when make menuconfig.
keep on rock, man!