Page translation

Jump to: navigation, search

Pages proposed for translation

These pages contain text with translation tags, but no version of these pages are currently marked for translation.

  1. WRTnode2Q开箱指南
  2. WRTnode2Q标准底板
  3. WRTnode2Q硬件扩展开发及量产指南
  4. WRTnode2Q详细参数
  5. WRTnode2Q针脚定义
  6. 如何编译一个适用于WRTnode的OpenCV应用/en
  7. Translations:如何编译一个适用于WRTnode的OpenCV应用/1/en

Pages in translation

Some version of these pages have been marked for translation.

  1. Add USB mobile hard disk
  2. Common method
  3. Compiling WRTnode static SDK
  4. DEV cables kit
  5. DTS修改指南
  6. Device Tree Source
  7. Exroot扩展U盘及安装nodejs
  8. Feeds resources
  9. GPIO资源
  10. Hardware and software parameters
  11. How to compile with the openwrt toolchain
  12. How to find a package in the configuration interface
  13. How to register a GPIO as Led or Button
  14. How to usb Qualcomm gobi 2000 3g module on WRTnode
  15. Http专题
  16. I2C的玩法
  17. LAN/WAN config
  18. OpenWrt package method
  19. OpenWrt增加软件包的方法
  20. Openwrt development
  21. Package resources
  22. Pin map
  23. Refresh the firmware
  24. Release UART
  25. Released multiused GPIO and register gpio-leds
  26. SPI的玩法
  27. Saving your WRTnode
  28. Starting
  29. Team
  30. Tf卡的玩法
  31. The 'special' USB cable customized for WRTnode
  32. The user space gpio calls
  33. Usb camera
  34. WRTnode1
  35. WRTnode1 U-Boot使用指南
  36. WRTnode1专用定制USB线
  37. WRTnode1开箱指南
  38. WRTnode1标准底板
  39. WRTnode1的特色
  40. WRTnode1系列
  41. WRTnode1详细参数
  42. WRTnode1针脚定义
  43. WRTnode2P/2Q标准底板
  44. WRTnode2P开箱指南
  45. WRTnode2P标准底板
  46. WRTnode2P的特色
  47. WRTnode2P硬件扩展开发及量产指南
  48. WRTnode2P设计调整
  49. WRTnode2P详细参数
  50. WRTnode2P针脚定义
  51. WRTnode2R
  52. WRTnode2R开箱指南
  53. WRTnode2R标准底板
  54. WRTnode2R硬件扩展开发及量产指南
  55. WRTnode2R详细参数
  56. WRTnode2R针脚定义
  57. WRTnode Features
  58. WRTnode U-Boot instructions
  59. WRTnode Web Portal
  60. WRTnode add i2c-gpio support
  61. WRTnode add i2c support
  62. WRTnode add spi cs1
  63. WRTnode add spi slave
  64. WRTnode add support for RoboPeak Mini USB Display
  65. WRTnode connect to the network through the wan port
  66. WRTnode connection TTL to USB devices
  67. WRTnode dedicated network cable
  68. WRTnode firmware
  69. WRTnode flash MAC via web
  70. WRTnode standard shield
  71. WRTnode专属网线
  72. WRTnode开发线材包
  73. WRTnode添加对 RoboPeak Mini USB Display的支持
  74. WRTnode的系统OpenWrt
  75. WRTnode网页入口
  76. WRTnode连接TTL to USB设备
  77. WRTnode通过网页刷写MAC
  78. 串口的玩法
  79. 使用c/c艹开发
  80. 使用node.js开发
  81. 使用python开发
  82. 使用shell开发
  83. 使用toolchain编译OpenWrt程序
  84. 出厂固件简介
  85. 刷机
  86. 在OpenWrt中使用Arduino函数:WRTnode2R的STM32开发指南
  87. 如何在配置界面寻找软件包
  88. 如何将WRTnode设置为有线路由器
  89. 如何编译一个WRTnode的固件
  90. 如何编译一个适用于WRTnode的OpenCV应用
  91. 如何通过无线连上互联网
  92. 将GPIO注册为一个led灯、按钮
  93. 搭建OpenWrt交叉编译环境
  94. 救砖
  95. 更改有线的WAN/LAN的划分
  96. 添加相关USB设备(3G网卡、U盘、usb摄像头)
  97. 用户空间gpio的调用
  98. 编译目录
  99. 首页
  100. WRTnode Wiki:About